Integrated Lights-Out 3 Virtual Serial Port configuration and operation HOWTO, 6th edition

11
Table 2. EMS SAC commands
Command Description
Help or ? Lists all commands available in the VSP console
Ch Lists all channels:
• ch –si <#> = Switch to a channel by its number.
• ch –sn <name> = Switch to a channel by its name.
• ch –ci <#> = Close a channel by its number.
• ch –cn <name> = Close a channel by its name.
Esc + Tab Selects a channel
Esc + Tab + 0 (zero) Returns to the EMS SAC channel.
Cmd Creates a command prompt channel
D Dumps the current kernel log
F Toggles detailed or abbreviated task list information.
I Lists all Internet Protocol (IP) network numbers and their IP addresses
i <#> <ip> <subnet> <gateway> Sets IP address, subnet, and gateway
Id Displays the identification information on the server:
• computer name
• computer GUID
• processor architecture
• version number
• build number
• product operating system
• applied service pack
• time since last reboot
k <pid> Stops the given process as defined by <pid>
l <pid> Lowers the priority of the process as defined by <pid> to the lowest
possible priority
Lock Locks access to command prompt channels
m <pid> <MB-allow> Limits the memory usage of a process to <MB-allow>
P Toggles paging the display
r <pid> Raises by one the priority of a process as defined by <pid>
S Displays the current time and date in 24-hour clock notation
s mm/dd/yyyy hh:mm Sets the current time and date in 24-hour clock notation
T Displays the current operating system task list
Restart Restarts the system immediately
Shutdown Shuts down the system immediately
Crashdump Crashes the system (crash dump must be enabled)