HP iLO 3 Scripting and Command Line Guide

ManualsBrandsHP ManualsComputer AccessoriesHP Integrated Lights-Out 3 (iLO 3) Firmware for ProLiant G7 Servers

GET_NETWORK_SETTINGS parameters

None

GET_NETWORK_SETTINGS runtime errors

None

GET_NETWORK_SETTINGS return messages

A possible GET_NETWORK_SETTINGS return message is:

<?xml version="1.0"?>

<RIBCL VERSION="2.22">

<RESPONSE

STATUS="0x0000"

MESSAGE='No error'

/>

<GET_NETWORK_SETTINGS>

<ENABLE_NIC VALUE="Y"/>

<SHARED_NETWORK_PORT VALUE="N"/>

<VLAN_ENABLED VALUE="N"/>

<VLAN_ID VALUE="0"/>

<SPEED_AUTOSELECT VALUE="Y"/>

<NIC_SPEED VALUE="Automatic"/>

<FULL_DUPLEX VALUE="Automatic"/>

<DHCP_ENABLE VALUE="Y"/>

<DHCP_GATEWAY VALUE="N"/>

<DHCP_DNS_SERVER VALUE="Y"/>

<DHCP_WINS_SERVER VALUE="N"/>

<DHCP_STATIC_ROUTE VALUE="N"/>

<DHCP_DOMAIN_NAME VALUE="N"/>

<DHCP_SNTP_SETTINGS VALUE="Y"/>

<REG_WINS_SERVER VALUE="N"/>

<REG_DDNS_SERVER VALUE="N"/>

<PING_GATEWAY VALUE="N"/>

<MAC_ADDRESS VALUE="1c:c1:de:17:b3:90"/>

<IP_ADDRESS VALUE="192.168.1.13"/>

<SUBNET_MASK VALUE="255.255.255.0"/>

<GATEWAY_IP_ADDRESS VALUE="0.0.0.0"/>

<DNS_NAME VALUE="weezer"/>

<DOMAIN_NAME VALUE="ilotest.com."/>

<PRIM_DNS_SERVER VALUE="0.0.0.0"/>

<SEC_DNS_SERVER VALUE="0.0.0.0"/>

<TER_DNS_SERVER VALUE="0.0.0.0"/>

<PRIM_WINS_SERVER VALUE="0.0.0.0"/>

<SEC_WINS_SERVER VALUE="0.0.0.0"/>

<SNTP_SERVER1 VALUE="192.168.1.5"/>

<SNTP_SERVER2 VALUE=""/>

<TIMEZONE VALUE="CST6CDT"/>

<STATIC_ROUTE_1 DEST="0.0.0.0"

MASK="0.0.0.0"

GATEWAY="0.0.0.0"/>

<STATIC_ROUTE_2 DEST="0.0.0.0"

MASK="0.0.0.0"

GATEWAY="0.0.0.0"/>

<STATIC_ROUTE_3 DEST="0.0.0.0"

MASK="0.0.0.0"

GATEWAY="0.0.0.0"/>

<IPV6_ADDRESS VALUE="2001:2:1::15"

PREFIXLEN="64"

ADDR_SOURCE="STATIC"

ADDR_STATUS="ACTIVE"/>

<IPV6_ADDRESS VALUE="2001:db8:1::50"

PREFIXLEN="64"

ADDR_SOURCE="STATIC"

76 RIBCL XML Scripting Language