HP iLO 3 Scripting and Command Line Guide

Example 3 Incorrectly combined script
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<RIB_INFO MODE="write">
<MOD_GLOBAL_SETTINGS>
<MIN_PASSWORD value="5"/>
</MOD_GLOBAL_SETTINGS>
<MOD_NETWORK_SETTINGS>
<DHCP_DNS_SERVER value="No"/>
<DHCP_WINS_SERVER value="No"/>
<DHCP_STATIC_ROUTE value="No"/>
</MOD_NETWORK_SETTINGS>
</RIB_INFO>
<USER_INFO MODE="write">
<ADD_USER USER_NAME="admin" USER_LOGIN="admin" PASSWORD="admin">
<ADMIN_PRIV value="Yes" />
<REMOTE_CONS_PRIV value="Yes" />
<RESET_SERVER_PRIV value="Yes" />
<VIRTUAL_MEDIA_PRIV value="Yes" />
<CONFIG_ILO_PRIV value="Yes" />
</ADD_USER>
<DELETE_USER USER_LOGIN="Administrator" />
</USER_INFO>
</LOGIN>
</RIBCL>
Example 4 Correctly combined script
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<RIB_INFO MODE="write">
<MOD_GLOBAL_SETTINGS>
<MIN_PASSWORD value="5"/>
</MOD_GLOBAL_SETTINGS>
</RIB_INFO>
<RIB_INFO MODE="write">
<MOD_NETWORK_SETTINGS>
<DHCP_DNS_SERVER value="No"/>
<DHCP_WINS_SERVER value="No"/>
<DHCP_STATIC_ROUTE value="No"/>
</MOD_NETWORK_SETTINGS>
</RIB_INFO>
<USER_INFO MODE="write">
<ADD_USER USER_NAME="admin" USER_LOGIN="admin" PASSWORD="admin">
<ADMIN_PRIV value="Yes" />
<REMOTE_CONS_PRIV value="Yes" />
<RESET_SERVER_PRIV value="Yes" />
<VIRTUAL_MEDIA_PRIV value="Yes" />
<CONFIG_ILO_PRIV value="Yes" />
</ADD_USER>
</USER_INFO>
<USER_INFO MODE="write">
<DELETE_USER USER_LOGIN="Administrator" />
</USER_INFO>
</LOGIN>
</RIBCL>
LOGIN
The LOGIN command provides the information that is used to authenticate the user whose permission
level is used when performing RIBCL actions. The specified user must have a valid iLO account to
LOGIN 63