Manualshelf

HP iLO 3 Scripting and Command Line Guide

ManualsBrandsHP ManualsComputer AccessoriesHP Integrated Lights-Out 3 (iLO 3) Firmware for ProLiant G7 Servers
51525354555657585960
Table 28 (page 59) shows the System Firmware properties. The properties are available at:
/system1/firmware1
Table 28 System Firmware Properties
DescriptionAccessProperty
Displays the version of the system ROM.Readversion
Displays the date the system ROM.Readdate
For example:
• show /system1/cpu1—Displays information on one CPU.
• show /system1/memory1—Displays information on one memory slot.
• show /system1/slot1—Displays information on one slot.
• show /system1/firmware1—Displays information about system ROM.
For example:
/system1/firmware1
Targets
Properties
version=P56
date=01/05/2010
Other commands
Other commands include the following:
start /system1/oemhp_vsp1 Starts a virtual serial port session. Press Esc ( to return to the
CLI session.
To send a System Request (SysRq), press Esc+Ctrl+b, and
then press h.
nmi server Generates and sends an NMI to the server. It is limited to
users with the Virtual Power and Reset privilege.
Specific commands 59