HP iLO 3 Scripting and Command Line Guide

Table 25 System CPU Properties
DescriptionAccessProperty
Displays the number of processor cores.Readnumber_cores
Displays the number of active processor cores.Readactive_cores
Displays the total number of threads on the active processor cores.Readthreads
Displays the processor speed.Readspeed
Displays the bit level technology of the memory.Readmemory_technology
Displays the size of the processor level-1 cache.Readcachememory1
Displays the size of the processor level-2 cache.Readcachememory2
Displays the size of the processor level-3 cache.Readcachememory3
For example:
show /system1/cpu1
/system1/cpu1
Targets
Properties
number_cores=12
active_cores=12
threads=12
speed=1900MHz
memory_technology=64-bit Capable
cachememory1=1536KB
cachememory2=6144KB
cachememory3=10240KB
The memory property displays information about the system memory.
Table 26 (page 58) shows the System memory properties. The properties are available at:
/system1/memoryn
Where n is the memory DIMM number.
Table 26 System Memory Properties
DescriptionAccessProperty
Displays the memory size.Readsize
Displays the memory speed.Readspeed
Displays the location of the memory.Readlocation
The Slot property displays information about the system slots.
Table 27 (page 58) shows the System Slot properties. The properties are available at:
/system1/slotn
Where n is the slot number.
Table 27 System Slot Properties
DescriptionAccessProperty
Displays the slot type.Readtype
Displays the slot width.Readwidth
The Firmware property displays information about the system ROM.
58 SMASH CLP Scripting Language