HP iLO 3 Scripting and Command Line Guide

Table 7 iLO Properties (continued)
DescriptionAccessProperty
Enables or disables RBSU prompt during POST. Boolean values
are accepted.
Read/Writeoemhp_rbsuenable
Enables or disables login requirement for accessing RBSU.
Boolean values are accepted.
Read/Writeoemhp_rbsulogin
Enables or disables iLO IP address display during POST.
Boolean values are accepted.
Read/Writeoemhp_rbsushowip
Sets the HTTP port value.Read/Writeoemhp_httpport
Sets the SSL port value.Read/Writeoemhp_sslport
Sets remote console port value.Read/Writeoemhp_rcport
Sets virtual media port value.Read/Writeoemhp_vmport
Sets the SSH port value.Read/Writeoemhp_sshport
Enables or disables SSH. Boolean values are accepted.Read/Writeoemhp_sshstatus
Enables or disables CLP session through serial port. Boolean
values are accepted.
Read/Writeoemhp_serialclistatus
Enables or disables authorization requirement for CLP session
through serial port. Boolean values are accepted.
Read/Writeoemhp_serialcliauth
Sets the serial port speed for the CLP session. The valid values
are 9600, 19200, 38400, 57600, and 115200.
Read/Writeoemhp_serialclispeed
Sets the minimum password length requirement.Read/Writeoemhp_minpwdlen
Enable or disable enforcing AES/3DES encryption.Read/Writeoemhp_enforce_aes
NOTE: When enabling AES/3DES, manually close all other
GUI, XML, and CLI connections since remaining sessions may
continue to use the non-AES/3DES cipher.
Sets the logging criteria for failed authentications.Read/Writeoemhp_authfailurelogging
Enables or disables the Remote Console Computer Lock.Read/Writeoemhp_computer_lock
Sets the value for hotkey Ctrl+T.Read/Writeoemhp_hotkey_ctrl_t
Sets the value for hotkey Ctrl+U.Read/Writeoemhp_hotkey_ctrl_u
Sets the value for hotkey Ctrl+V.Read/Writeoemhp_hotkey_ctrl_v
Sets the value for hotkey Ctrl+W.Read/Writeoemhp_hotkey_ctrl_w
Sets the value for hotkey Ctrl+X.Read/Writeoemhp_hotkey_ctrl_x
Sets the value for hotkey Ctrl+Y.Read/Writeoemhp_hotkey_ctrl_y
Verbs
• cd
• version
• exit
• show
• set
• oemhp_loadSSHkey
• oemhp_resetHotkeys
Specific commands 43