HP iLO 3 Scripting and Command Line Guide

HOLD_PWR_BTN parameters
TOGGLE—Defines the action to take based on the current power state of the server. The following
will occur based on the value of TOGGLE:
• When the server power is on, a Yes value for TOGGLE will turn the power off.
• When the server power is off, the server will remain off regardless of the value of TOGGLE.
HOLD_PWR_BTN runtime errors
The possible error messages include:
• Server information is open for read-only access. Write access is
required for this operation.
• User does not have correct privilege for action. RESET_SERVER_PRIV
required.
COLD_BOOT_SERVER
The COLD_BOOT_SERVER command forces a cold boot of the server, if the server is currently on.
For this command to parse correctly, the COLD_BOOT_SERVER command must appear within a
SERVER_INFO command block, and SERVER_INFO MODE must be set to write. The user must
have the Virtual Power and Reset privilege to execute this command.
For example:
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<SERVER_INFO MODE="write">
<COLD_BOOT_SERVER/>
</SERVER_INFO>
</LOGIN>
</RIBCL>
COLD_BOOT_SERVER parameters
None
COLD_BOOT_SERVER runtime errors
The possible error messages include:
• Server information is open for read-only access. Write access is
required for this operation.
• Host power is already OFF.
• User does not have correct privilege for action. RESET_SERVER_PRIV
required.
WARM_BOOT_SERVER
The WARM_BOOT_SERVER command forces a warm boot of the server, if the server is currently
on. For this command to parse correctly, the WARM_BOOT_SERVER command must appear within
a SERVER_INFO command block, and SERVER_INFO MODE must be set to write. The user must
have the Virtual Power and Reset privilege to execute this command.
For example:
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<SERVER_INFO MODE="write">
<WARM_BOOT_SERVER/>
SERVER_INFO 139