HP iLO 3 Scripting and Command Line Guide
<PORT_DESCRIPTION VALUE = "iLO Dedicated Network Port"/>
<MAC_ADDRESS VALUE = "9c:8e:99:0a:1d:96"/>
<IP_ADDRESS VALUE = "16.85.177.5"/>
<STATUS VALUE = "OK"/>
</iLO_4>
</NIC_INFORMATION>
<STORAGE>
<CONTROLLER>
<LABEL VALUE = "Controller on System Board"/>
<STATUS VALUE = "OK"/>
<CONTROLLER_STATUS VALUE = "OK"/>
<SERIAL_NUMBER VALUE = "50014380215F0070"/>
<MODEL VALUE = "HP Smart Array P420i Controller"/>
<FW_VERSION VALUE = "3.41"/>
<DRIVE_ENCLOSURE>
<LABEL VALUE = "Port 1I Box 1"/>
<STATUS VALUE = "OK"/>
<DRIVE_BAY VALUE = "04"/>
</DRIVE_ENCLOSURE>
<DRIVE_ENCLOSURE>
<LABEL VALUE = "Port 2I Box 0"/>
<STATUS VALUE = "OK"/>
<DRIVE_BAY VALUE = "01"/>
</DRIVE_ENCLOSURE>
<LOGICAL_DRIVE>
<LABEL VALUE = "01"/>
<STATUS VALUE = "OK"/>
<CAPACITY VALUE = "68 GB"/>
<FAULT_TOLERANCE VALUE = "RAID 0"/>
<PHYSICAL_DRIVE>
<LABEL VALUE = "Port 1I Box 1 Bay 3"/>
<STATUS VALUE = "OK"/>
<SERIAL_NUMBER VALUE = "6TA0N3SZ0000B231CYDT"/>
<MODEL VALUE = "EH0072FAWJA"/>
<CAPACITY VALUE = "68 GB"/>
<LOCATION VALUE = "Port 1I Box 1 Bay 3"/>
<FW_VERSION VALUE = "HPDH"/>
<DRIVE_CONFIGURATION VALUE = "Configured"/>
</PHYSICAL_DRIVE>
</LOGICAL_DRIVE>
</CONTROLLER>
</STORAGE>
<FIRMWARE_INFORMATION>
<INDEX_1>
<FIRMWARE_NAME VALUE = "HP ProLiant System ROM"/>
<FIRMWARE_VERSION VALUE = "02/09/2012"/>
</INDEX_1>
<INDEX_2>
<FIRMWARE_NAME VALUE = "HP ProLiant System ROM - Backup"/>
<FIRMWARE_VERSION VALUE = "02/09/2012"/>
</INDEX_2>
<INDEX_3>
<FIRMWARE_NAME VALUE = "HP ProLiant System ROM Bootblock"/>
<FIRMWARE_VERSION VALUE = "10/18/2011"/>
</INDEX_3>
<INDEX_4>
<FIRMWARE_NAME VALUE = "iLO"/>
<FIRMWARE_VERSION VALUE = "1.05 Feb 22 2012"/>
</INDEX_4>
<INDEX_5>
<FIRMWARE_NAME VALUE = "Power Management Controller Firmware"/>
<FIRMWARE_VERSION VALUE = "3.0"/>
</INDEX_5>
<INDEX_6>
<FIRMWARE_NAME VALUE = "Power Management Controller Firmware Bootloader"/>
<FIRMWARE_VERSION VALUE = "2.7"/>
</INDEX_6>
<INDEX_7>
<FIRMWARE_NAME VALUE = "System Programmable Logic Device"/>
<FIRMWARE_VERSION VALUE = "Version 0x15"/>
</INDEX_7>
<INDEX_8>
<FIRMWARE_NAME VALUE = "Server Platform Services (SPS) Firmware"/>
<FIRMWARE_VERSION VALUE = "2.1.5.2B.4"/>
</INDEX_8>
</FIRMWARE_INFORMATION>
<HEALTH_AT_A_GLANCE>
<BIOS_HARDWARE STATUS= "OK"/>
<FANS STATUS= "OK"/>
<FANS REDUNDANCY= "Redundant"/>
<TEMPERATURE STATUS= "OK"/>
SERVER_INFO 129