HP iLO 3 Scripting and Command Line Guide

<LOCATION VALUE = "Chassis"/>
<STATUS VALUE = "OK"/>
<CURRENTREADING VALUE = "29" UNIT="Celsius"/>
<CAUTION VALUE = "80" UNIT="Celsius"/>
<CRITICAL VALUE = "85" UNIT="Celsius"/>
</TEMP>
</TEMPERATURE>
<POWER_SUPPLIES>
<POWER_SUPPLY_SUMMARY>
<PRESENT_POWER_READING VALUE = "117 Watts"/>
<POWER_MANAGEMENT_CONTROLLER_FIRMWARE_VERSION VALUE = "3.1"/>
<POWER_SYSTEM_REDUNDANCY VALUE = "Not Redundant"/>
<HP_POWER_DISCOVERY_SERVICES_REDUNDANCY_STATUS VALUE = "Not Redundant"/>
<HIGH_EFFICIENCY_MODE VALUE = "Balanced"/>
</POWER_SUPPLY_SUMMARY>
<SUPPLY>
<LABEL VALUE = "Power Supply 1"/>
<PRESENT VALUE = "Yes"/>
<STATUS VALUE = "Input Voltage Lost"/>
<PDS VALUE = "Yes"/>
<HOTPLUG_CAPABLE VALUE = "Yes"/>
<MODEL VALUE = "656364-B21"/>
<SPARE VALUE = "660185-001"/>
<SERIAL_NUMBER VALUE = "5BXRK0BLL2C0CK"/>
<CAPACITY VALUE = "1200 Watts"/>
<FIRMWARE_VERSION VALUE = "1.00"/>
</SUPPLY>
<SUPPLY>
<LABEL VALUE = "Power Supply 2"/>
<PRESENT VALUE = "Yes"/>
<STATUS VALUE = "Good, In Use"/>
<PDS VALUE = "Yes"/>
<HOTPLUG_CAPABLE VALUE = "Yes"/>
<MODEL VALUE = "656364-B21"/>
<SPARE VALUE = "660185-001"/>
<SERIAL_NUMBER VALUE = "5BXRCX34D0N0FL"/>
<CAPACITY VALUE = "1200 Watts"/>
<FIRMWARE_VERSION VALUE = "1.00"/>
</SUPPLY>
<POWER_DISCOVERY_SERVICES_IPDU_SUMMARY>
<IPDU>
<BAY VALUE = "2"/>
<STATUS VALUE = "iPDU Not Redundant"/>
<PART_NUMBER VALUE = "AF522A"/>
<SERIAL_NUMBER VALUE = "2CJ0221672"/>
<MAC_ADDRESS VALUE = "d8:d3:85:6d:36:9c"/>
<IPDU_LINK VALUE = "http://16.85.177.189"/>
</IPDU>
</POWER_SUPPLIES>
<VRM>
</VRM>
<PROCESSORS>
<PROCESSOR>
<LABEL VALUE = "Proc 1"/>
<NAME VALUE = " Intel(R) Xeon(R) CPU E5-2470 0 @ 2.30GHz "/>
<STATUS VALUE = "OK"/>
<SPEED VALUE = "2300 MHz"/>
<EXECUTION_TECHNOLOGY VALUE = "8/8 cores; 16 threads"/>
<MEMORY_TECHNOLOGY VALUE = "64-bit Capable"/>
<INTERNAL_L1_CACHE VALUE = "256 KB"/>
<INTERNAL_L2_CACHE VALUE = "2048 KB"/>
<INTERNAL_L3_CACHE VALUE = "20480 KB"/>
</PROCESSOR>
<PROCESSOR>
<LABEL VALUE = "Proc 2"/>
<NAME VALUE = " Intel(R) Xeon(R) CPU E5-2470 0 @ 2.30GHz "/>
<STATUS VALUE = "OK"/>
<SPEED VALUE = "2300 MHz"/>
<EXECUTION_TECHNOLOGY VALUE = "8/8 cores; 16 threads"/>
<MEMORY_TECHNOLOGY VALUE = "64-bit Capable"/>
<INTERNAL_L1_CACHE VALUE = "256 KB"/>
<INTERNAL_L2_CACHE VALUE = "2048 KB"/>
<INTERNAL_L3_CACHE VALUE = "20480 KB"/>
</PROCESSOR>
</PROCESSORS>
<MEMORY>
<ADVANCED_MEMORY_PROTECTION>
<AMP_MODE_STATUS VALUE = "Advanced ECC"/>
<CONFIGURED_AMP_MODE VALUE = "Advanced ECC"/>
<AVAILABLE_AMP_MODES VALUE = "On-line Spare, Advanced ECC"/>
</ADVANCED_MEMORY_PROTECTION>
126 RIBCL XML Scripting Language