HP iLO 3 Scripting and Command Line Guide

<DIR_USER_CONTEXT_13 VALUE= ""/>
<DIR_USER_CONTEXT_14 VALUE= ""/>
<DIR_USER_CONTEXT_15 VALUE= ""/>
<DIR_ENABLE_GRP_ACCT VALUE= "Y"/>
<DIR_GRPACCT1_NAME VALUE="CN=iLOAdmins,CN=Users,DC=demo,DC=com"/>
<DIR_GRPACCT1_PRIV VALUE="1,2,3,4,5"/>
<DIR_GRPACCT1_SID VALUE= "S-1-0"/>
<DIR_KERBEROS_ENABLED VALUE="N"/>
<DIR_KERBEROS_REALM VALUE=""/>
<DIR_KERBEROS_KDC_ADDRESS VALUE= ""/>
<DIR_KERBEROS_KDC_PORT VALUE= "88"/>
</GET_DIR_CONFIG>
• A Kerberos-enabled directory return message:
<GET_DIR_CONFIG>
<DIR_AUTHENTICATION_ENABLED VALUE="N"/>
<DIR_LOCAL_USER_ACCT VALUE="Y"/>
<DIR_SERVER_ADDRESS VALUE= ""/>
<DIR_SERVER_PORT VALUE= "636"/>
<DIR_OBJECT_DN VALUE= ""/>
<DIR_USER_CONTEXT_1 VALUE= ""/>
<DIR_USER_CONTEXT_2 VALUE= ""/>
<DIR_USER_CONTEXT_3 VALUE= ""/>
<DIR_USER_CONTEXT_4 VALUE= ""/>
<DIR_USER_CONTEXT_5 VALUE= ""/>
<DIR_USER_CONTEXT_6 VALUE= ""/>
<DIR_USER_CONTEXT_7 VALUE= ""/>
<DIR_USER_CONTEXT_8 VALUE= ""/>
<DIR_USER_CONTEXT_9 VALUE= ""/>
<DIR_USER_CONTEXT_10 VALUE= ""/>
<DIR_USER_CONTEXT_11 VALUE= ""/>
<DIR_USER_CONTEXT_12 VALUE= ""/>
<DIR_USER_CONTEXT_13 VALUE= ""/>
<DIR_USER_CONTEXT_14 VALUE= ""/>
<DIR_USER_CONTEXT_15 VALUE= ""/>
<DIR_ENABLE_GRP_ACCT VALUE= "N"/>
<DIR_GRPACCT1_NAME VALUE= "Administrators"/>
<DIR_GRPACCT1_PRIV VALUE= "1,2,3,4,5,6"/>
<DIR_GRPACCT1_SID VALUE= ""/>
<DIR_GRPACCT2_NAME VALUE= "Authenticated Users"/>
<DIR_GRPACCT2_PRIV VALUE= "6"/>
<DIR_GRPACCT2_SID VALUE= "S-1-5-11"/>
<DIR_GRPACCT3_NAME VALUE= "user0"/>
<DIR_GRPACCT3_PRIV VALUE= "1,2,3,4,5,6"/>
<DIR_GRPACCT3_SID VALUE= "S-1-5-21-123456789-123456789-
1234567890-1234"/>
<DIR_KERBEROS_ENABLED VALUE="Y"/>
<DIR_KERBEROS_REALM VALUE="EXAMPLE.NET"/>
<DIR_KERBEROS_KDC_ADDRESS VALUE= "kdc.example.net"/>
<DIR_KERBEROS_KDC_PORT VALUE= "88"/>
</GET_DIR_CONFIG>
MOD_DIR_CONFIG
The MOD_DIR_CONFIG command modifies the directory settings on iLO. For this command to
parse correctly, the MOD_DIR_CONFIG command must appear within a DIR_INFO command
block, and DIR_INFO MODE must be set to write. The user must have the Configure iLO Settings
privilege to execute this command.
The MOD_DIR_CONFIG is used in different ways depending on the environment. See
MOD_DIRECTORY.XML (example below) for an example suitable for use in an environment with
DIR_INFO 109