iLO 2 User Guide

To control the translation, use the xlt option with the appropriate reference number. For
example to set iLO 2 Text Console to a sampling rate of 50 ms using the translation of a British
keyboard, enter:
Textcons speed 50 xlt 41
To translate to another language, use one of the following:
Reference numberKeyboard
0United States
1British
2Belgian
3Danish
4Finnish
5French
6French Canadian
7German
8Italian
9Latin American
10Norwegian
11Portuguese
12Spanish
13Swedish
14Swiss - French
16Swiss - German
• Configuring Remote Console hot keys
To use special key sequences that you cannot duplicate in the remote console client, the Remote
Console hot keys configured for Remote Console operate in iLO 2 Text Console. For more
information, see “Remote console hot keys” (page 83).
• Configuring character mapping
In general, under the ASCII character set, CONTROL (ASCII characters than 32) are not
printable and cannot be displayed. These characters can be used to represent items such as
arrows, stars, or circles. Some of these characters are mapped to equivalent ASCII
representations. The following are supported equivalents:
Mapped equivalentDescriptionCharacter value
*Small dot0x07
*Sun0x0F
>Right pointer0x10
<Left pointer0x11
^Up arrow0x18
vDown arrow0x19
>Left arrow0x1A
98 Using iLO 2