iLO 2 User Guide

1. Download and review the scripting and command line resource guide

at http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?

contentType=SupportManual&lang=en&cc=us&docIndexId=64179&taskId=135&

prodTypeId=18964&prodSeriesId=1146658.

2. Write a script that configures iLO 2 for schema-free directories support and run it. The following

script can be used as a template.

<DIR_INFO MODE = "write">

<MOD_DIR_CONFIG>

<DIR_ENABLE_GRP_ACCT value = "yes"/>

<DIR_GRPACCT1_NAME value ="CN=Administrators,CN=Builtin,DC=HP,DC=com "/>

<DIR_GRPACCT1_PRIV value = "1"/>

</MOD_DIR_CONFIG>

</DIR_INFO>

</LOGIN>

</RIBCL>

Schema-free HPLOMIG-based setup

HPLOMIG is the easiest way to set up a large number of LOM processors for directories. To use

HPLOMIG, download the HPLOMIG utility and additional documentation from the HP website at

http://www.hp.com/servers/lights-out. HP recommends using HPLOMIG when configuring many

LOM processors for directories. For more information on using HPLOMIG, see “HPLOMIG directory

migration utility” (page 162).

Schema-free setup options

Setup options are the same regardless of which method (browser, HPLOMIG, or script) you use to

configure the directory.

After enabling directories and selecting the Schema-free option, you have the following options.

Minimum Login Flexibility

• Enter the directory server's DNS name or IP address and LDAP port. Typically, the LDAP port

for an SSL connection is 636.

• Enter the distinguished name for at least one group. This group can be a security group (for

example: CN=Administrators,CN=Builtin,DC=HP,DC=com) or any other group as

long as the intended iLO 2 users are members of the group.

With a minimum configuration, you can log in to iLO 2 using your full distinguished name

and password. You must be a member of a group that iLO 2 recognizes.

134 Directory services