iLO 2 Scripting and Command Line Guide

<!-- RILOE II - None. -->
<ENFORCE_AES value="Y"/>
<AUTHENTICATION_FAILURE_LOGGING value="3"/>
<CONSOLE_CAPTURE_ENABLE value="Yes" />
<CONSOLE_CAPTURE_BOOT_BUFFER_ENABLE value="Yes" />
<CONSOLE_CAPTURE_FAULT_BUFFER_ENABLE value="Yes" />
<INTERACTIVE_CONSOLE_REPLAY_ENABLE value="Yes" />
<CONSOLE_CAPTURE_PORT value="17990" />
<CAPTURE_AUTO_EXPORT_ENABLE value="No" />
<CAPTURE_AUTO_EXPORT_LOCATION value="HTTP://1.1.1.1/folder/capture%h%t.ilo" />
<CAPTURE_AUTO_EXPORT_USERNAME value="username" />
<CAPTURE_AUTO_EXPORT_PASSWORD value="password" />
<SHARED_CONSOLE_ENABLE value="No" />
<SHARED_CONSOLE_PORT value="9300" />
<!-- Firmware support information for next two tags:-->
<!-- iLO 2 - Version 1.75 and later.-->
<!-- iLO - None. -->
<!-- RILOE II - None. -->
<KEY_UP_KEY_DOWN value="Yes"/>
<CAPTURE_MANUAL_EXPORT value="Yes"/>
<!-- Firmware support information for next tag: -->
<!-- iLO 2 - Version 1.10 and later. -->
<!-- iLO - Version 1.80 and later. -->
<!-- RILOE II - None. -->
<REMOTE_CONSOLE_ACQUIRE value="Yes" />
<!-- Firmware support information for next 13 tags: -->
<!-- iLO 2 - None. -->
<!-- iLO - None. -->
<!-- RILOE II - All versions. -->
<!--
<HOST_KEYBOARD_ENABLED value ="YES"/>
<REMOTE_KEYBOARD_MODEL value = "US"/>
<POCKETPC_ACCESS value = "YES"/>
<CIPHER_STRENGTH value = "128"/>
<SNMP_ADDRESS_1 value = "123.124.125.126"/>
<SNMP_ADDRESS_2 value = "test"/>
<SNMP_ADDRESS_3 value = "dest"/>
<OS_TRAPS value = "Y"/>
<RIB_TRAPS value = "N"/>
<CIM_SECURITY_MASK value = "3"/>
<EMS_STATUS value = "Y" />
<BYPASS_POWER_CABLE_REPORTING value = "N" />
<SNMP_PASSTHROUGH_STATUS value = "Y" />
-->
</MOD_GLOBAL_SETTINGS>
</RIB_INFO>
</LOGIN>
</RIBCL>
RIB_INFO 99