iLO 2 Scripting and Command Line Guide

<!-- in a server enclosure. The IP address must be set prior -->
<!-- with Mod_Enc_Bay_IP_Settings.xml -->
<!-- <ENCLOSURE_IP_ENABLE VALUE="yes"/> -->
</MOD_NETWORK_SETTINGS>
</RIB_INFO>
</LOGIN>
Modify VLAN example:
<RIBCL version="2.21">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<RIB_INFO MODE="WRITE" >
<MOD_NETWORK_SETTINGS>
<SHARED_NETWORK_PORT VALUE="yes"/>
<VLAN_ENABLED VALUE="yes"/>
<VLAN_ID VALUE="1"/>
</MOD_NETWORK_SETTINGS>
</RIB_INFO>
</LOGIN>
</RIBCL>
RBSU POST IP example:
<RIBCL version="2.21">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<RIB_INFO MODE="write" >
<MOD_GLOBAL_SETTINGS>
<RBSU_POST_IP VALUE="Y"/>
</MOD_GLOBAL_SETTINGS>
</RIB_INFO>
</LOGIN>
</RIBCL>
Shared network port example:
<RIBCL version="2.21">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<RIB_INFO MODE="WRITE" >
<MOD_NETWORK_SETTINGS>
<!-- Desired NIC: Substitute: -->
<!-- iLO NIC <SHARED_NETWORK_PORT VALUE="N"/> -->
<!-- Host NIC <SHARED_NETWORK_PORT VALUE="Y"/ -->
<SHARED_NETWORK_PORT VALUE="N"/>
</MOD_NETWORK_SETTINGS>
</RIB_INFO>
</LOGIN>
</RIBCL>
MOD_NETWORK_SETTINGS parameters
If the following parameters are not specified, then the parameter value for the specified setting is
preserved. Zero values are not permitted in some fields. Consequently, an empty string deletes the
current value in some fields.
ENABLE_NIC – Enables the NIC to reflect the state of iLO 2. The values are Yes or No. It is case
insensitive.
RIB_INFO 93