iLO 2 Scripting and Command Line Guide

9. Enter the query name, for example, Mgmt Processors.
10. Select Device(s) of type, and then select Devices by product name.
In the criteria window, set the product name to HP iLO 3.
11. Select Device(s) of type, and then select Devices by product name.
In the criteria windows, set the product name to HP iLO 2.
12. Click type in the Query Description box.
The Device Types window opens.
13. Select Management Processor and click OK.
14. Click Save to return to the Device Query screen.
15. Find the newly created query in the appropriate query category, and click the query name to
run it for verification.
16. Click Overview on the left side of the screen after the verification has taken place.
The initial page for devices opens.
Application Launch using HP SIM
The Application Launch combines the RIBCL, CPQLOCFG, and the query definition to manage
Group Administration of iLO devices.
To create an Application Launch task:
1. Click Device in the navigation bar on the top left side of the screen.
2. Click Tasks to open the Tasks screen.
3. Click New Control Task and select Application Launch from the menu to open the Create/Edit
Task screen.
4. Enter the full path and name for the Lights-Out Configuration Utility in the area provided. If
the CPQLOCFG.EXE file is in the root directory of the C:\ drive, then the path is:
C:\cpqlocfg.exe.
5. Enter the parameters in the area provided. HP SIM requires the following parameters for
CPQLOCFG:
-F Full path of the RIBCL file name
-V Verbose message (optional)
If the RIBCL file is in the root directory of the C:\ drive, then the parameters are:
-F C:\MANAGEUSERS.xml -V
NOTE: The -L parameter cannot designate an output log file. A default log file named with
the DNS name, or the IP address is created in the same directory where CPQLOCFG is
launched.
6. Click Next.
A screen displays the options for naming the task, defining the query association, and setting
a schedule for the task.
7. Enter a task name in the Enter a name for this task box.
8. Select the query that had been created earlier, for example, Mgmt Processors.
9. Click Schedule to define when the Application Launch task runs.
A schedule configuration window appears.
10. Click OK to set the schedule.
NOTE: The default schedule for a control task is Now.
Application Launch using HP SIM 51