iLO 2 Scripting and Command Line Guide

Firmware – Displays information about the system ROM.
The following properties are available in /system1/firmware:
DescriptionAccessProperty
Displays the version of the system ROMRead
version
Displays the date the system ROMRead
date
Examples:
• show /system1/cpu1 – Displays information on one CPU
• show /system1/memory1 – Displays information on one memory slot
• show /system1/slot1 – Displays information on one slot
• show /system1/firmware1 – Displays information about system ROM
For example:
/system1/firmware1
Targets
Properties
version=P56
date=01/05/2006
NOTE: system1/cpu, system1/memory, and system1/slot are not supported in iLO
1.81.
Other commands
• start /system1/oemhp vsp1 – Starts virtual serial port session. Press ESC( to return to
the CLI session
• nmi server – Generates and sends an NMI to the server and is limited to users with the
Power and Reset privilege
Specific commands 37