iLO 2 Scripting and Command Line Guide

DescriptionAccessProperty
Displays temperature sensor caution valueRead
Oemhp_CautionValue
Displays temperature sensor critical valueRead
Oemhp_CriticalValue
Examples
The command show system1/fan1 displays the system fan1 properties. For example:
/system1/fan1
Targets
Properties
DeviceID=Fan 1
ElementName=I/O Board
OperationalStatus=Ok
VariableSpeed=Yes
DesiredSpeed=40
HealthState=Ok.
VRM power supplies are usually mapped to the sensor targets. The command show system1/
sensor1 displays the VRM 1 properties. For example:
/system1/sensor1
Targets
Properties
DeviceID=VRM 1
ElementName=CPU 1
OperationalStatus=Ok
RateUnits=Volts
CurrentReading=0
SensorType=Voltage
HealthState=Ok
oemhp_CautionValue=0
oemhp_CriticalValue=0
Other sensor targets show system temperatures. The command show system1/sensor3 displays
one of the temperature zone properties. For example:
/system1/sensor3
Targets
Properties
DeviceID=Temp 1
ElementName=I/O Board Zone
OperationalStatus=Ok
RateUnits=Celsius
CurrentReading=32
SensorType=Temperature
HealthState=Ok
oemhp_CautionValue=68
oemhp_CriticalValue=73
24 Command line