HP Integrated Lights-Out 2 User Guide

The following options are available:
• DHCP allows you to select static IP (disabled) or enable the use of a DHCP server to obtain
an IP address for the iLO 2 subsystem.
You cannot set the iLO 2 IP address if DHCP is enabled. Disabling DHCP allows you to
configure the IP address. The IP Address field also appears on the Network Settings page for
your convenience. Changing the value on either page changes the DHCP setting.
• IP Address is the iLO 2 IP address. If DHCP is used, the iLO 2 IP address is automatically
supplied. If not, enter a static IP address. The IP Address field appears on the Network Settings
page for your convenience. Changing the value on either page changes the IP address of iLO
2.
• Domain Name is the name of the domain where the iLO 2 subsystem resides. This name is
assigned by DHCP (if DHCP is enabled). Enabling DHCP allows you to configure the following
DHCP options:
— Use DHCP Supplied Gateway – Toggles if iLO 2 uses the DHCP server-supplied gateway.
If not, enter an gateway address in the Gateway IP Address box.
— Use DHCP Supplied DNS Servers – Toggles if iLO 2 uses the DHCP server-supplied DNS
server list. If not, enter the DNS server address in the Primary, Secondary, and Tertiary
DNS Server fields.
— Use DHCP Supplied WINS Servers – Toggles if iLO 2 uses the DHCP server-supplied
WINS server list. If not, enter the WINS server address in the Primary and Secondary
WINS Server fields.
— Use DHCP Supplied Static Routes – Toggles if iLO 2 uses the DHCP server-supplied static
route. If not, enter the static route address in Static Route #1, Static Route #2, or Static
Route #3 fields.
— Use DHCP Supplied Domain Name – Toggles if iLO 2 uses the DHCP server-supplied
domain name. If not, enter a domain name in the Domain Name box.
• WINS Server Registration toggles if iLO 2 registers its name with a WINS server.
• DDNS Server Registration toggles if iLO 2 registers its name with a DDNS server.
64 Configuring iLO 2