HP Integrated Lights-Out 2 Management Processor Scripting and Command Line Resource Guide

• COMPUTER_LOCK value must be set to custom to use the COMPUTER_LOCK_KEY tag.

• The COMPUTER_LOCK key command was used without a preceding COMPUTER_LOCK value

command equal to custom.

• The key parameter specified is not valid

GET_NETWORK_SETTINGS

The GET_NETWORK_SETTINGS command requests the respective iLO 2 network settings. For this

command to parse correctly, the command must appear within a RIB_INFO command block, and

RIB_INFO MODE can be set to read or write.

Example:

<RIB_INFO MODE="read">

<GET_NETWORK_SETTINGS/>

</RIB_INFO>

</LOGIN>

</RIBCL>

GET_NETWORK_SETTINGS parameters

None

GET_NETWORK_SETTINGS runtime errors

None

GET_NETWORK_SETTINGS return messages

A possible GET_NETWORK_SETTINGS return message is:

<ENABLE_NIC VALUE="Y"/>

<SHARED_NETWORK_PORT VALUE="N"/>

<VLAN_ID VALUE="0"/>

<SPEED_AUTOSELECT VALUE="Y"/>

<NIC_SPEED VALUE="10"/>

<FULL_DUPLEX VALUE="N"/>

<DHCP_ENABLE VALUE="Y"/>

<DHCP_GATEWAY VALUE="Y"/>

<DHCP_DNS_SERVER VALUE="Y"/>

<DHCP_WINS_SERVER VALUE="Y"/>

<DHCP_STATIC_ROUTE VALUE="Y"/>

<DHCP_DOMAIN_NAME VALUE="Y"/>

<REG_WINS_SERVER VALUE="Y"/>

<REG_DDNS_SERVER VALUE="Y"/>

<PING_GATEWAY VALUE="N"/>

<MAC_ADDRESS VALUE="00:12:79:a5:25:42"/>

<IP_ADDRESS VALUE="170.100.8.10"/>

<SUBNET_MASK VALUE="255.255.255.0"/>

<GATEWAY_IP_ADDRESS VALUE="170.100.8.254"/>

<DNS_NAME VALUE="ILO000FWDC451"/>

<DOMAIN_NAME VALUE="ferrari.com"/>

RIB_INFO 85