HP Integrated Lights-Out 2 Management Processor Scripting and Command Line Resource Guide

<USER_INFO MODE="read">

<GET_ALL_USER_INFO />

</USER_INFO>

</LOGIN>

</RIBCL>

GET_ALL_USER_INFO parameters

None

GET_ALL_USER_INFO runtime errors

The possible GET_ALL_USER_INFO error message include:

User does not have correct privilege for action. ADMIN_PRIV required.

GET_ALL_USER_INFO return messages

A possible GET_ALL_USER_INFO return message is:

<GET_ALL_USER_INFO/>

<GET_USER

USER_NAME="Admin"

USER_LOGIN="Admin"

ADMIN_PRIV="Y"

CONFIG_RILO_PRIV="Y"

LOGIN_PRIV="Y"

REMOTE_CONS_PRIV="Y"

RESET_SERVER_PRIV="Y"

VIRTUAL_MEDIA_PRIV="Y"

/> ......

The same information will be repeated for all the users.

</GET_ALL_USER_INFO>

A possible unsuccessful request is:

<RESPONSE

STATUS="0x0023"

MESSAGE='User does NOT have correct privilege for action. ADMIN_PRIV required.'

RIB_INFO

The RIB_INFO command can only appear within a LOGIN command block. When the command

is parsed, it reads the iLO 2 configuration information database into memory and prepares to edit

it. Only commands that are RIB_INFO type commands are valid inside the RIB_INFO command

block. The RIB_INFO command generates a response that indicates to the host application whether

the database was successfully read or not. If the database is open for writing by another application,

then this call will fail.

RIB_INFO requires the MODE parameter with a value of read or write. MODE is a specific string

parameter with a maximum length of 10 characters that specifies what you intend to do with the

information.

Write mode enables both reading and writing of iLO 2 information. Read mode prevents

modification of the iLO 2 information.

Example:

80 Using RIBCL