HP Integrated Lights-Out 2 Management Processor Scripting and Command Line Resource Guide

<MP>
<ST>1</ST>
<PN>Integrated Lights-Out 2 (iLO 2)</PN>
<FWRI>1.10</FWRI>
<HWRI>ASIC: 5</HWRI>
<SN>ILO0004PBM158</SN>
<UUID>ILO1226570004PBM158</UUID>
</MP>
</RIMP>
Query definition in HP SIM
To group all of the iLO 2 devices, log in to HP SIM and create a query.
To create the query:
1. Log in to HP SIM.
2. Click Device in the navigation bar on the top left side of the screen.
3. Click Queries>Device.
4. Locate the Personal Queries section in the main window. If a query category exists, proceed
to step 7, otherwise proceed to step 5.
5. Click New to create a new category. For this example, the name of the new category is RIB
Cards. Click CreateCategory.
6. Click Queries to return to the Device Queries screen.
7. Click New, within the appropriate query category, to open the Create/Edit Query screen
where the query definition is created.
8. Define the query name, for example "Mgmt Processors."
9. Select Device(s) of type, and then select Devices by product name. In the criteria windows, set
the product name to HP Integrated Lights-Out 2.
10. Click type in the Query Description field. A window opens where you define the device type.
11. Select Management Processor and click OK.
12. Click Save to return to the Device Query screen.
13. Find the newly created query in the appropriate query category, and click the query name to
run it for verification.
14. Click Overview on the left side of the screen after the verification has taken place. The initial
page for devices opens.
Application Launch using HP SIM
The Application Launch combines the RIBCL, the Lights-Out Configuration Utility, and the query
definition to manage the Group Administration of the iLO 2s.
To create an Application Launch task:
1. Click Device in the navigation bar on the top left side of the screen.
2. Click Tasks to open the Tasks screen.
3. Click New Control Task and select Application Launch from the dropdown menu to open the
Create/Edit Task screen.
4. Enter the full path and name for the Lights-Out Configuration Utility in the area provided. If
the CPQLOCFG.EXE file is in the root directory of the C:\ drive, then the path is C:\
cpqlocfg.exe.
5. Enter the parameters in the area provided. HP SIM requires the following parameters for the
Lights-Out Configuration Utility:
-F is the full path of the RIBCL file name.
48 Group administration and iLO 2 scripting