HP Integrated Lights-Out 2 Management Processor Scripting and Command Line Resource Guide

• dhcpserver1
Properties
◦ AccessInfo
◦ AccessContext
• settings1
Targets
— DNSSettings1
Properties
– DNSServerAddress
– RegisterThisConnection
– DomainName
– DHCPOptionToUse
WINSSettingData1
Properties
– WINSServerAddress
– RegisterThisConnection
– DHCPOptionToUse
— Verbs
– cd
– version
– exit
– show
• StaticIPSettings1
Properties
◦ oemhp_SRoute1Address
◦ oemhp_Gateway1Address
◦ oemhp_SRoute2Address
◦ oemhp_Gateway2Address
◦ oemhp_SRoute3Address
◦ oemhp_
Gateway3Address
◦ DHCPOptionToUse
Examples
set /map1/enetport1 speed=100
set /map1/enetport1/lanendpt1 ipv4address=192.168.0.13
subnetmask=255.255.252
You can specify one or more properties on the command line. If multiple properties are given on
the same command line, they must to be separated by a space.
20 Command line