HP Integrated Lights-Out 2 Management Processor Scripting and Command Line Resource Guide

a SERVER_INFO command block, and SERVER_INFO MODE must be set to write. The user must
have the virtual power and reset privilege to execute this command.
Example:
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<SERVER_INFO MODE="write">
<HOLD_PWR_BTN/>
</SERVER_INFO>
</LOGIN>
</RIBCL>
HOLD_PWR_BTN parameters
There are no parameters for this command.
HOLD_PWR_BTN runtime errors
The possible error messages include:
• Server information is open for read-only access. Write access is required for this operation.
• User does not have correct privilege for action. RESET_SERVER_PRIV required.
COLD_BOOT_SERVER
This COLD_BOOT_SERVER command will force a cold boot of the server, if the server is currently
on. For this command to parse correctly, the COLD_BOOT_SERVER command must appear within
a SERVER_INFO command block, and SERVER_INFO MODE must be set to write. The user must
have the virtual power and reset privilege to execute this command.
Example:
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<SERVER_INFO MODE="write">
<COLD_BOOT_SERVER/>
</SERVER_INFO>
</LOGIN>
</RIBCL>
COLD_BOOT_SERVER parameters
There are no parameters for this command.
COLD_BOOT_SERVER runtime errors
The possible error messages include:
• Server information is open for read-only access. Write access is required for this operation.
• Host power is already OFF.
• User does not have correct privilege for action. RESET_SERVER_PRIV required.
WARM_BOOT_SERVER
This WARM_BOOT_SERVER command will force a warm boot of the server, if the server is currently
on. For this command to parse correctly, the WARM_BOOT_SERVER command must appear within
a SERVER_INFO command block, and SERVER_INFO MODE must be set to write. The user must
have the virtual power and reset privilege to execute this command.
Example:
142 Using RIBCL