HP Integrated Lights-Out 2 Management Processor Scripting and Command Line Resource Guide

is assigned to use the Static IP Bay Configuration settings. The LSB represents slot 1. For example,
the MASK="0x0001" only allows slot 1 to use Static IP Bay Configuration. This number can be
either a hexadecimal number or a decimal number. This command must appear inside the
MOD_ENCLOSURE_IP_SETTINGS block.
ENCLOSURE_IP_ENABLE enables or disables the use of Static IP Bay Configuration. This attribute
must appear inside the MOD_NETWORK_SETTINGS command block. The possible values are Y
or N. It is case insensitive. This attribute is only applicable on blade servers.
MOD_ENCLOSURE_IP_SETTINGS runtime errors
The possible MOD_ENCLOSURE_IP_SETTINGS error messages include:
• Rack information is open for read-only access. Write access is required for this operation.
• User does not have correct privilege for action. CONFIG_ILO_PRIV is required.
GET_TOPOLOGY
The GET_TOPOLOGY command requests the respective iLO 2 to return the current topology of the
rack infrastructure. For this command to parse correctly, the GET_TOPOLOGY command must
appear within a RACK_INFO command block, and RACK_INFO MODE can be set to read or
write.
Example:
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<RACK_INFO MODE="read">
<GET_TOPOLOGY/>
</RACK_INFO>
</LOGIN>
</RIBCL>
GET_TOPOLOGY parameters
None
GET_TOPOLOGY return message
An example of a successful request follows:
<RK_TPLGY CNT="3">
<RUID>xxxxxx</RUID>
<ICMB ADDR="0xAA55" MFG="232" PROD_ID="NNN" SER="123" NAME="Power_1">
<LEFT/>
<RIGHT ADDR="0xAB66" SER="123" NAME="Server_1"/>
</ICMB>
<ICMB ADDR="0xAB66" MFG="232" PROD_ID="NNN" SER="456" NAME="Server_1">
<LEFT ADDR="0xAA55" SER="123" NAME="Power_1"/>
<RIGHT ADDR="0xAC77" SER="123" NAME="Power_2"/>
</ICMB>
<ICMB ADDR="0xAC77" MFG="232" PROD_ID="NNN" SER="789" NAME="Power_2">
<RIGHT/>
</ICMB>
</RK_TPLGY>
RACK_INFO 123