HP Integrated Lights-Out 2 Management Processor Scripting and Command Line Resource Guide

<RACK_INFO MODE="read">
……… RACK_INFO commands ………
</RACK_INFO>
GET_RACK_SETTINGS
The GET_RACK_SETTINGS command requests the respective iLO 2's rack settings. For this command
to parse correctly, the GET_RACK_SETTINGS command must appear within a RACK_INFO command
block, and RACK_INFO MODE can be set to read or write.
Example:
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<RACK_INFO MODE="read">
<GET_RACK_SETTINGS/>
</RACK_INFO>
</LOGIN>
</RIBCL>
GET_RACK_SETTINGS parameters
None
GET_RACK_SETTINGS runtime errors
None
GET_RACK_SETTINGS return messages
A possible GET_RACK_SETTINGS return message is:
<GET_RACK_SETTINGS>
<RACK_NAME VALUE="HPspace"/>
<ENCLOSURE_NAME VALUE="Home"/>
<ENCLOSURE_SN VALUE="44XP0606XP33"/>
<BAY_NAME VALUE="Library"/>
<BAY VALUE="2"/>
<FACILITY_PWR_SOURCE VALUE="N"/>
<RACK_AUTO_PWR VALUE="Y"/>
<SNMP_RACK_ALERTS VALUE="Y"/>
<LOG_RACK_ALERTS VALUE="N"/>
</GET_RACK_SETTINGS >
GET_DIAGPORT_SETTINGS
The GET_DIAGPORT_SETTINGS command requests the respective iLO diagnostic port settings.
For this command to parse correctly, the GET_DIAGPORT_SETTINGS command must appear within
a RACK_INFO command block, and RACK_INFO MODE can be set to read or write.
Example:
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<RACK_INFO MODE="read">
<GET_DIAGPORT_SETTINGS/>
</RACK_INFO>
</LOGIN>
</RIBCL>
RACK_INFO 119