HP Integrated Lights-Out 2 Management Processor Scripting and Command Line Resource Guide

• An invalid Virtual Media option has been given.
• Virtual Media already connected through a script.
You must eject or disconnect before inserting new media.
EJECT_VIRTUAL_MEDIA
EJECT_VIRTUAL_MEDIA ejects the Virtual Media image if one is inserted. The EJECT_VIRTUAL_MEDIA
command must display within a RIB_INFO element and RIB_INFO must be in write mode.
Example:
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="Admin" PASSWORD="Password">
<RIB_INFO MODE="write">
<EJECT_VIRTUAL_MEDIA DEVICE="FLOPPY"/>
</RIB_INFO>
</LOGIN>
</RIBCL>
EJECT_VIRTUAL_MEDIA parameters
DEVICE specifies the Virtual Media device target. The possible values are FLOPPY or CDROM. If
the DEVICE is not specified, FLOPPY is assumed. This value is case-sensitive.
EJECT_VIRTUAL_MEDIA runtime errors
The possible EJECT_VIRTUAL_MEDIA errors are:
• RIB information is open for read-only access. Write access is required for this operation.
• User does not have correct privilege for action. VIRTUAL_MEDIA_PRIV required.
• No image present in the Virtual Media drive.
• An invalid Virtual Media option has been given.
GET_VM_STATUS
GET_VM_STATUS returns the Virtual Media drive status. This command must display within a
RIB_INFO element.
Example:
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN = "adminname" PASSWORD = "password">
<RIB_INFO MODE = "read">
<GET_VM_STATUS DEVICE="CDROM"/>
</RIB_INFO>
</LOGIN>
</RIBCL>
GET_VM_STATUS parameters
DEVICE specifies the Virtual Media device target. The possible values are FLOPPY or CDROM. If
the DEVICE is not specified, FLOPPY is assumed. This value is case-sensitive.
GET_VM_STATUS runtime errors
The possible GET_VM_STATUS error is:
An invalid Virtual Media option has been given.
104 Using RIBCL