HP StorageWorks Reference Information Storage System V1.1 Administrator Guide (February 2005)

LO
Chapter 2: Platform Control Center Nagios folder
2-70 HP StorageWorks Reference Information Storage System Administrator Guide, February 2005
Commands that disable (notifications, status checks, and so on) override
commands that enable. For example, suppose you disable checks for a
particular service, such as
PING , using the Service Information view (command
Disable checks of this service ), but enable checks for all services using the Nagios
Info
view (command Start executing service checks ). That particular service ( PING )
is
not checked because disabling overrides enabling.
Related Views
• For information about commands affecting only specific host groups,
hosts, and services, see
Hostgroup Information view , on page 2-121,
Host Information view , on page 2-126, and Service Information view , on
page 2-133.
• To disable notifications for a single host or service over a defined period,
schedule downtime for it. See
Host Downtime view , on page 2-65.
Process Commands section
This section contains links to commands that perform actions on a specific
host group. To execute a command:
1. Click on any link listed in Table 2-52. The
External Command Interface view
for that command appears. See
External Command Interface view , on
page 2-143, for more information.
2. In the
Command Options section, click Commit .
Table 2-50: Links to Nagios Info view
Origin Link
left menu Nagios Info
Table 2-51: Links from Nagios Info view
Destination Link
External Command Interface view , on
page 2-143
command (see Process Commands
box
, on page 2-69 .)