HP StorageWorks Reference Information Storage System V1.1 Administrator Guide (February 2005)

LO
Chapter 2: Platform Control Center Nagios folder
2-68 HP StorageWorks Reference Information Storage System Administrator Guide, February 2005
Nagios folder
Nagios Info view
This view provides information about Nagios, the PCC process monitoring
hosts and services. The gray-box heading for this view is
Nagios Process Infor-
mation
.
PCC
does not use several features of this view. Only features that PCC uses
are described.
Program Information chart
Table 2-48: Program Information chart, Nagios Info view
Variable Description
Program Start Time Time PCC started.
Total Running Time Length of time PCC monitoring has been running since
the Program Start Time.
Nagios PID Nagios Linux process identifier (PID).
Notifications Enabled? If notifications are currently enabled, in general. Even if
Yes, notifications can be disabled for individual hosts or
services. If No, however, notifications are disabled for all
hosts and services.
Service Checks Being
Executed?
If PCC is currently monitoring services, in general. Even
if Yes, individual service checks can be disabled. If No,
however,
no services are checked.
Running As A Daemon? If monitoring process (Nagios) is running as a daemon.
This is always Yes.
Last External Command
Check
Time of latest execution of external command. See
External Command Interface view , on page 2-143 .
(When you submit a command, a short delay can elapse
before the Control Center executes it.)