HP StorageWorks Reference Information Storage System V1.1 Administrator Guide (February 2005)

LO
Chapter 4: PST Importer Using PST Importer
4-8 HP StorageWorks Reference Information Storage System Administrator Guide, February 2005
4. To import PST files larger than 150 MB, edit the following setting in
RISS PST Importer.ini to reduce performance degradation and
increase throughput:
[PSTLaunchMgr]
MaxProcesses=1
5. If necessary, select PST files you do not want to process, and click
Remove .
6. In the
Select Output File box, enter the path and file name of the file you
are creating or revising, or click
Browse to navigate to a location.
7. Enter MAPI logon and RISS location information in the following boxes:
– Exchange Server : Exchange server used when accessing the GAL for
address resolution. XML tag is
<Server> .
– Mailbox : Mailbox on Exchange server used when accessing the GAL for
address resolution. XML tag is
<Mailbox> .
– SMTP Host : DNS name or IP address of the RISS SMTP portal used to
submit messages to RISS. XML tag is
<SMTPServer> .
– Port : SMTP port number. This setting is optional and the default is 25.
XML tag is
<SMTPPort> .
– HTTP Host : Domain name or IP address of the RISS HTTP server
queried when checking for duplicate messages. XML tag is
<HTTPServer> .
– Domain : RISS domain used when checking for duplicate messages to
be submitted. RISS domain is case-sensitive and must match domain
name in the RISS Domain.jcml configuration file. XML tag is
<RISSDomain> .
– Repository : Repository into which documents in the Select Files To
Process list are delivered. XML tag is
<Repository> .
– Audit Repository : Name of repository that receives the PST Importer log
file created during the import process. XML tag is
<AuditRepository> .
8. To indicate mining and tombstone settings, select the following check
boxes: