HP StorageWorks Reference Information Storage System V1.1 Administrator Guide (February 2005)
View Config view Chapter 2:
Platform Control Center
HP StorageWorks Reference Information Storage System Administrator Guide, February 2005 2-109
Table 2-91: View Config view features, services
Feature Description
Host Name of host on which service is running.
Click link to display configuration information for host. See
View
Config view features, hosts
, on page 2-107
.
Description Description of service. Example: Spine Check.
Max. Check
Attempts
Maximum number of times to check service before a service problem
status condition is considered HARD. See
Hard and soft status
conditions
, on page 2-15
.
Normal Check
Interval
Time between ordinary checks of service.
Retry Check
Interval
Time between checks of service when it is not responding.
Check
Command
Command used to check service.
Click link to display command definition. See
View Config view
features, commands
, on page 2-112
.
Check Period Name of defined checking period: always, which means service can be
checked any time.
Click link to display definition of the always period. See
View Config
view features, time periods
, on page 2-111
.
Enable Active
Checks
If active service checks are currently enabled.
Default
Contact
Groups
Contact groups defined for service: allAdmins is only contact group
PCC uses.
Click contact group link to display definition of contact group. See
View Config view features, contact groups
, on page 2-111
.
Enable
Notifications
If notifications are currently enabled for service.
Notification
Interval
This is always No Renotification, meaning only one notification is sent
when a service is detected as having a problem (see next).
Notification
Options
Service status values that can cause notifications to be sent:
CRITICAL and RECOVERY, where RECOVERY represents a transition
from a CRITICAL status value to the normal status value (OK).