HP Insight Remote Support Solution Support FAQ

Frequently Asked Questions
HP Insight Remote Support: Solution Support FAQ Page 12 of 13
The following configuration will complete testing soon. This FAQ will be updated once testing has
been completed. In the meantime HP expects the following behavior; please contact HP Support
if this is not the case.
CS700 for Virtualization
Expect following devices to be monitored:
 BladeSystem c7000
 ProLiant BL470c Gen8
o Configured for embedded RS only (iLO 4)
 ProLiant DL360p Gen8
 HP 5920AF Switch
Note: The HP 5920AF Switch is supported without stacking in Insight RS 7.0.8
Content Level Update 1.
Expect following components not supported by Insight RS:
 3PAR products have separate support automation (STATS)
o 3PAR StoreServ File Controller
o 3PAR 7200 StoreServ Storage
5. HP Converged System 300 for Vertica
The major components of CS300 for Vertica include:
 ProLiant DL380 Gen8
 DL360p Gen8
 HP 5900AFSwitch
 Red Hat Enterprise Linux
The following has been tested with Insight RS, and the currently supported Monitored
Devices include:
 ProLiant DL380p
o Red Hat Enterprise Linux 6.4
 ProLiant DL360p
o Red Hat Enterprise Linux 6.4
o Microsoft Windows 2012
 iLO 4
 HP 5900AF switch IRF configuration
The following components are not supported by Insight RS
 The Intelligent PDU: PDUs are not supported.
Installing Insight RS on CS300 for Vertica:
A Hosting Device with a supported ProLiant Windows-based server will be required to
host Insight RS.