HP Insight Remote Support and Insight Online Setup Guide for HP ProLiant Gen8 Servers and HP BladeSystem c-Class Enclosures

Figure 16 iLO Central Connect Remote Support registration
5. Enter the Insight RS Hosting Device host name or IP address and port number.
The default port is 7906.
6. Click Register.
By registering, you agree to send registration, service events, configuration, and Active Health
System data to HP.
For more information about the type of data collected, see the HP iLO 4 User Guide. All data
collected and sent to HP will be managed according to the HP Data Privacy Policy.
You can view the HP Data Privacy Policy at the following website: http://www.hp.com/go/
privacy.
A message similar to the following appears:
Successfully registered! Insight Remote Support hosting server:
<cms.mycompany.com:port>
where <cms.mycompany.com:port> is the Insight RS Hosting Device host name or IP
address and port number.
Method 2: Using Intelligent Provisioning to register for Central Connect Remote Support
Use the following procedure to register an HP ProLiant Gen8 server for Central Connect Remote
Support.
1. Verify that the server meets the prerequisites for using Insight Remote Support.
For more information, see “Prerequisites” (page 25).
Registering devices for Central Connect Remote Support 27