HP Insight Remote Support and Insight Online Setup Guide for HP ProLiant Gen8 Servers and HP BladeSystem c-Class Enclosures

Figure 6 Insight Remote Support maintenance page
4. Update the following settings, as needed:
• Web Proxy Server
• Web Proxy Port
• Web Proxy Username
• Web Proxy Password
5. Click Update Proxy.
Registering an HP BladeSystem c-Class enclosure for Direct Connect Remote Support
Use the following procedure to register an HP BladeSystem c-Class enclosure for Direct Connect
Remote Support. When you register for Direct Connect Remote Support, you must complete steps
in both the OA interface and the Insight Online portal.
1. Verify that the system meets the prerequisites for using the Insight Remote Support solution.
For more information, see “Prerequisites” (page 11).
2. Log in to the OA web interface (https://<OA hostname or IP address>).
3. Navigate to the Enclosure Information→Enclosure Settings→Remote Support page.
4. Select Register this enclosure directly to HP.
The page updates to show the Direct Connect registration options, as shown in Figure 7
(page 18).
Registering devices for Direct Connect Remote Support 17