HP Insight Remote Support and Insight Online Setup Guide for HP ProLiant Gen8 Servers and HP BladeSystem c-Class Enclosures

6. Optional: Enter the following information if the HP ProLiant Gen8 server uses a web proxy
server to access the Internet:
• Web Proxy Server
• Web Proxy Port
• Web Proxy Username
• Web Proxy Password
7. Select the I accept the terms and conditions of the HP Software License Agreement and the HP
Insight Management Additional License Authorization check box.
NOTE: You can view these documents at http://www.hp.com/go/SWLicensing.
8. Click Register.
Clicking Register is Step 1 of a two-step registration process. Step 2 is completed in HP Insight
Online.
By registering, you agree to send registration, service events, configuration, and Active Health
System data to HP.
For more information about the type of data collected, see the HP iLO 4 User Guide. All data
collected and sent to HP will be managed according to the HP Data Privacy Policy.
You can view the HP Data Privacy Policy at the following website: http://www.hp.com/go/
privacy.
When Step 1 of the registration process begins, the following message appears:
Step 1 of registration in progress, Please wait...
When Step 1 is finished, the following message appears:
Step 1 of remote support registration has been completed. Please
proceed to step 2 to complete the registration process.
Allow up to 5 minutes for your registration request to be fully processed.
9. Complete Step 2 of the registration process, as described in “Completing registration in Insight
Online” (page 20).
TIP: To streamline the process when you have multiple servers to register, complete Step 1
for all of the servers first, and then use a single Insight Online session to complete Step 2 for
all of the servers.
10. Return to the Remote Support page in iLO web interface, select the Please confirm that you
have completed the registration process in HP Insight Online check box, and then click Apply.
TIP: You can use RIBCL XML scripts to complete this step for a batch of HP ProLiant Gen8
servers. For more information, see the HP iLO 4 Scripting and Command Line Guide.
A message similar to the following appears:
Successfully registered!
HP Passport account used to register this server: <HP passport User
ID>.
11. Optional: If you want to receive email alerts about system events, configure AlertMail on the
Administration→Management→AlertMail page.
For more information, see the HP iLO 4 User Guide.
Registering devices for Direct Connect Remote Support 13