HP Insight Remote Support 7.0.9 Release Notes

HP Insight Remote Support 7.0.9 Release Notes
23
HP-UX operating system prerequisites
Important – Information for all HP-UX versions
It is Critical that System Fault Management (SFM) is the last software component installed or upgraded from the list below.
System Management Web is optional, but it allows you to take full advantage of System Fault Management’s EVWEB GUI
component which allows viewing of events handled by SFM on the host.
HP WBEM Services, OnlineDiag and SysMgmtWeb are available on the HP-UX Operating Environment (OE) media and can be
selected for installation during the SFM installation.
Patches are available from HP Support Center. After sign-in, click the Patch Management link from the left menu. Enter the
patch name into the search box and click GO.
On the preceding HP Integrity servers, the following minimum HP-UX software components are required to make them
eligible for HP Insight Remote Support 7.0.9:
Table 10. Required software components for HP-UX 11i v2
Version required
Notes
HP-UX Operating
Environment
11iv2
 September, 2004 11i v2 OE (minimum OE
release)
 May, 2005 11i v2 OE or later (required for
vPars enablement)
While not required for HP-UX 11i v2, HP strongly
recommends installing the latest
B.11.23.0712.070 Base Quality Pack Bundle for
HP-UX 11i v2 (December 2007) as it fulfills all
patch requirements and provides a stable
supported environment. However, it is not a
compulsory requirement for Insight Remote
Support.
Operating System
Patch
Requirements
BUNDLE11i patch bundle B.11.23.0409.3
(September, 2004)
In addition, the following patches are required:
 PHKL_36288 – 11.23 Cumulative diag2
driver and vPars enablement (use in place of
PHKL_32653), requires a reboot after
installation
 PHKL_34795 – 11.23 Cumulative IPMI driver
patch (reboot required after install)
 PHSS_37552 – 1.0 Aries cumulative patch
 PHSS_37947 – 1.0 linker +fdp cumulative
patch
 PHSS_35055 – aC++ Runtime (IA: A.06.10,
PA: A.03.71)
 PHSS_36345 – 11.23 Integrity Unwind
Library
These six additional patches for HP-UX 11i v2
are not part of the Bundle11i and must be
installed in addition to it.
How to install patches for HP-UX 11iv2:
Go to www.hp.com/go/hpsc and sign in using
your HP Passport account.
In the left menu, click the Patch management
link. Enter the patch name into the Patch
Management search box and click GO.
OpenSSL Secure
Network
Communications
Protocol
A.00.09.07i.012 (December, 2006) or later
Online Diagnostics
B.11.23.10.05 HPUX 11.23 Support Tools Bundle
(December, 2007) or later
WBEMSvcs (WBEM
Services Core
Product)
A.02.05.08 WBEM Services CORE Product
(December, 2007) or later
You are advised to check the WBEM Services
Release Notes including the WBEM Provider
Compatibility Table for that product version, if
you need to install or update this service.
System
Management Web
(recommended for
event monitoring,
required for
configuration
collection)
A.2.2.7 HP-UX Web Based System Management
User Interface (December 2007) or later
System Management Web is optional, but it
allows you to take full advantage of SFM's
EVWEB GUI component which allows viewing of
events handled by SFM on the host.
If only SysMgmtHomepage version 2.2.6.2 is
present on the server, then the following patch
must also be applied:
For HP-UX 11i v2 (11.23) OE apply patch