HP Insight Remote Support 7.0.9 Quick Installation Guide

Fulfilling Pre-Installation System Requirements
2 Fulfilling Pre-Installation System Requirements
2.1 Fulfill Hardware Requirements
Before installing Insight RS, complete the following hardware requirements:
Hardware Requirement
Required/
Optional
Completed?
A supported 32-bit or 64-bit Microsoft® Windows® ProLiant server with a
valid warranty or contract. Refer to the HP Insight Remote Support
Release Notes to make sure your ProLiant server is supported as the
Hosting Device.
Installation on a VMware, Citrix or Hyper-V virtual guest is also supported.
Important: When running the Hosting Device in a virtual environment, add
an extra 10% to the resources for each Virtual Machine added
to the ProLiant.
Required
Memory requirements for managing 100 devices or less:
• Minimum 4 GB for new installations.
• Recommended 6 GB, 8 GB if using HP Systems Insight Manager
(SIM).
Memory requirements for managing up to 500 devices:
• Minimum 6 GB for new installations.
• Recommended 8 GB, 10 GB if using HP SIM.
Memory requirements for managing up to 2,500 devices:
• Minimum 8 GB for new installations.
• Recommended 12 GB, 16 GB if using HP SIM.
Required
Free disk space requirements for managing 100 devices or less:
• 2 GB for installation.
• 4 GB for operation.
Free disk space requirements for managing up to 500 devices:
• 2 GB for installation.
• 8 GB for operation.
Free disk space requirements for managing up to 2,500 devices:
• 2 GB for installation.
• 28 GB for operation.
Required
HP Insight Remote Support: Quick Installation Guide Page 4 of 13