HP Insight Remote Support 7.0.9 Monitored Devices Configuration Guide

For WBEM Providers to communicate to the Hosting Device, you must provide the WBEM credentials
within the Insight RS Console when you are completing the Insight Remote Support configuration.
Verify Communication Between Monitored Device and
Insight RS
To verify communication between your monitored device and Insight RS, complete the following steps:
Verify Connectivity by Sending a WBEM Test Indication
WBEM Providers may be used to send WBEM Indications to verify connectivity.
1. In a web browser, access System Management Homepage (SMH) on the monitored device:
https://ipaddress:2381.
2. Log on using the administrator user name and password for the monitored device.
Note: If you are not prompted for a logon, check the upper right corner of the SMH interface
and click the Sign In link. If you are not logged in as an administrator for the monitored
device you will not have all of the relevant configuration options.
3. In the top menu bar, click Settings.
4. If you chose to install WBEM with the Support Pack, it will be set as your Data Source, click the
Send Test Indication option.
HP Insight Remote Support 7.0.9:Monitored Devices Configuration Guide Page 84 of 267
Chapter 9: Configuring Integrity Windows 2008 Servers