HP Insight Remote Support 7.0.9 Monitored Devices Configuration Guide
Verify Communication Between Monitored Device and
Insight RS
To verify communication between your monitored device and Insight RS, complete the following steps:
Verify Connectivity by Sending an SNMP Test Trap
Use SNMP Agents to send SNMP Test Traps to verify connectivity.
1. In a web browser, access System Management Homepage (SMH) on the monitored device:
https://[ipaddress]:2381.
2. Log on using the administrator user name and password for the monitored device.
Note: If you are not prompted to log on, check the upper right corner of the SMH interface
and click the Sign In link. If you are not logged in as an administrator for the monitored
device you will not have all of the relevant configuration options.
3. If SNMPis not set as your Data Source, click Settings in the top menu bar.
4. In the Select SMH Data Source box, click the Select link.
5. In the Select Data Source section choose the SNMP option, and then click Select.
6. Once your Data Source is set to SNMP, click the Settings option, and then select the SNMP &
Agent Configuration setting.
HP Insight Remote Support 7.0.9:Monitored Devices Configuration Guide Page 79 of 267
Chapter 8: Configuring Integrity Windows 2003 Servers