HP Insight Remote Support 7.0.9 Monitored Devices Configuration Guide

Initiating a Data Collection in the iLO 4 Web Interface
To initiate a data collection in the iLO 4 web interface, complete the following steps:
1.
Log on to the iLO 4 web interface (https://<iLO hostname or IP address>).
2. Navigate to Remote Support → Data Collections. The Data Collections screen displays.
3. Click Send Data Collection.
4. Click OK to confirm the action. When the transmission completes, the Last Data Collection
Transmission date and time updates.
iLO sends the data collection to Insight RS. In the Insight RS Console you can view the results on the
Collection Services → Basic Collection Results screen.
Initiating a Data Collection in Insight Remote Support
To initiate a data collection from Insight Remote Support, complete the following steps:
1. Log on to the Insight RS Console.
2. Navigate to Collection Services → Collection Schedules.
3. In the List of Collection Schedules pane, select Server Basic Configuration Collection Schedule.
4. In the Schedule Information pane, click Run Now.
Insight Remote Support runs the schedule. You can view the results on the Basic Collection Results tab.
Send an Active Health System Report
Note: Insight Remote Support runs an Active Health System report when the ProLiant server is
discovered. If you send an Active Health System report using one of the methods described
below, two Active Health System reports appear for the device in the Insight RS Console.
Sending an Active Health System Report from the iLO 4 Web
Interface
To send an Active Health System report from the iLO 4 web interface, complete the following steps:
1.
Log on to the iLO web interface (https://<iLO hostname or IP address>).
2. Navigate to Remote Support → Data Collections. The Data Collections screen displays.
3. Click Send Active Health System Report.
4. Click OK to confirm the action. When the transmission completes, the Last Active Health System
Reporting Transmission date and time updates.
HP Insight Remote Support 7.0.9:Monitored Devices Configuration Guide Page 41 of 267
Chapter 2: Configuring ProLiant Gen8 Servers