HP Insight Remote Support 7.0.9 Monitored Devices Configuration Guide

Discovery Monitoring Basic
Collections
SAN
Collections
Notes
HP Solutions
E5000 Messaging
Systems
SNMPv1 or
WMI
SNMPv1 or
WMI
SNMPv1 or
WMI
These devices should be configured the same as a Windows
ProLiant server.
You can choose to use SNMPv1 or WMI, however to gather
SAN Collections, you must use WMI.
Configuration collections for the chassis connector use
HTTP.
See "Configuring ProLiant Windows Servers" on page 45.
WMI
HTTP
Rack and Power
HP Rack-
mountable and
Tower UPS
SNMPv1 SNMPv1 Configuration collections are not supported.
If your UPSuses a Management Module, see "Configuring
UPS Management Modules" on page 247.
If your UPSuses a Network Module, see "Configuring UPS
Network Modules" on page 249.
HP Modular
Cooling System
SNMPv1 SNMPv1 Configuration collections are not supported.
See "Configuring Modular Cooling Systems" on page 254.
Applications
VMware vCenter
Server on ProLiant
VMware
VirtualCenter
Web Service
Interface
VMware
VirtualCenter
Web Service
Interface
Gathers configuration collections on the ESX and ESXi
virtual machines in the VMware vCenter cluster.
See "Configuring VMware vCenter Servers" on page 258.
Table 1.1 Required Monitored Device Communication Protocols and Components for Insight RS Services, continued
HP Insight Remote Support 7.0.9:Monitored Devices Configuration Guide Page 33 of 267
Chapter 1: Understanding Monitored Devices Prerequisites