HP Insight Remote Support 7.0.9 Monitored Devices Configuration Guide

Discovery Monitoring Basic
Collections
SAN
Collections
Notes
HP BladeSystems
HP Onboard
Administrator for
c-class
Enclosures
SNMPv1 SNMPv1 HP c-Class BladeSystem Enclosures can be monitored
using the embedded management capabilities in the HP
Onboard Administrator (OA) or by configuring SNMP in the
OA.
See "Configuring BladeSystem c-Class Enclosures" on page
141.
For configuring the OA, see "Configuring BladeSystem c-
Class Enclosures Through the OA" on page 141.
For configuring using SNMP, see "Configuring BladeSystem
c-Class Enclosures Using SNMP" on page 145.
HTTPS
HP ProLiant
BladeSystem
Servers
(See Notes) Supported ProLiant BladeSystem servers are monitored
independent of the c-Class Enclosure in which they are
installed. ProLiant BladeSystem servers can be configured
using the instructions for ProLiant servers.
For configuration details, see the ProLiant server section that
corresponds to the operating system installed on the ProLiant
BladeSystem server.
HP Integrity
BladeSystem
Servers
(See Notes) Supported Integrity BladeSystem servers are monitored
independent of the c-Class Enclosure in which they are
installed. Integrity BladeSystem servers can be configured
using the instructions for Integrity servers.
For configuration details, see the Integrity server section that
corresponds to the operating system installed on the Integrity
BladeSystem server.
Table 1.1 Required Monitored Device Communication Protocols and Components for Insight RS Services, continued
HP Insight Remote Support 7.0.9:Monitored Devices Configuration Guide Page 28 of 267
Chapter 1: Understanding Monitored Devices Prerequisites