HP Insight Remote Support 7.0.9 Monitored Devices Configuration Guide

3. Select the SNMP version from the SNMP Version drop-down list.
4. Fill in the appropriate fields.
5. Click Save.
6. Set the Hosting Device as a trap receiver UPS Network Module web interface. The Trap Receivers
Settings screen allows an administrator to configure management applications to receive SNMP
traps from the UPS Network Module. SNMP management applications, such as Insight Remote
Support, can receive notifications from the UPS Network Module.
To configure the Hosting Device as an SNMP trap recipient, complete the following steps:
a. In the left menu, click Notified Applications, then click Add Trap Receiver. Configure up to
three applications to receive SNMP traps from the UPS Network Module.
b. Type the name of the application, such as Insight RS, in the Application Name field. HP
recommends adding “SNMP” or “Trap” to the name to for easy monitoring.
HP Insight Remote Support 7.0.9:Monitored Devices Configuration Guide Page 251 of 267
Chapter 34: Configuring Uninterruptable Power Supplies