HP Insight Remote Support 7.0.9 Monitored Devices Configuration Guide

Discovery Monitoring Basic
Collections
SAN
Collections
Notes
Windows 2003 on
Integrity
WMI WMI WMI WMI Must install the Integrity Support Pack and all providers that
ship with it. This includes the installation of SNMPv1 and
WMI.
See "Configuring Integrity Windows 2003 Servers" on page
75.
SNMPv1 SNMPv1 SNMPv1
ELMC
Windows 2008 on
Integrity
WMI WMI WMI WMI Must install the HP Integrity Support Pack and all providers
that ship with it.
See "Configuring Integrity Windows 2008 Servers" on page
83.
Linux on Integrity WBEM WBEM Configuration collections are not supported, except when the
server is part of a SAN collection. You can choose to use
either Telnet or SSH to gather SAN collections for an
Integrity Linux server.
See "Configuring Integrity Linux Servers" on page 87.
Telnet or
SSH
HP-UX on
Integrity
WBEM WBEM WBEM Install the proper WBEM providers on HP-UX. These
generally are part of the feature set of HP-UX and will update
through patches and software updates on the device as
appropriate.
You can choose to use either Telnet or SSH to gather SAN
collections for an Integrity HP-UX server.
See "Configuring Integrity HP-UX Servers" on page 89.
Telnet or
SSH
Table 1.1 Required Monitored Device Communication Protocols and Components for Insight RS Services, continued
HP Insight Remote Support 7.0.9:Monitored Devices Configuration Guide Page 25 of 267
Chapter 1: Understanding Monitored Devices Prerequisites