HP Insight Remote Support 7.0.9 Monitored Devices Configuration Guide

6. Enter configuration mode:
configure
7. Turn off filetransfer using SSH:
no ip ssh filetransfer
8. Enable the TFTP client:
tftp client
9. Move the public key to the switch:
copy tftp pub-key-file <tftp_server_ip> <public_key_file> manager
10. Enable public key authentication:
aaa authentication ssh login public-key
11. Enable user/password authentication:
aaa authentication ssh enable local
12. Write the configuration and public key to memory:
wr mem
Add the SSH Protocol Credential to the Insight RS Console
To add the SSH protocol credential, complete the following steps:
1. In the Insight RS Console, add a SSH certificate credential on the Discovery → Credentials tab.
a. Select Secure Shell (SSH) from the Select and Configure Protocol drop-down list and click
New.
b. Select Certificate Credential from the Type drop-down list.
c.
Browse to the private key file, PCPrivate.pem.
d. Type the Certificate Alias. The alias will take the form of switchname-manager. The SSH protocol
HP Insight Remote Support 7.0.9:Monitored Devices Configuration Guide Page 240 of 267
Chapter 32: Configuring ProVision-based Networking Switches