HP Insight Remote Support 7.0.9 Monitored Devices Configuration Guide
Discovery Monitoring Basic
Collections
SAN
Collections
Notes
Linux on ProLiant SNMPv1,
SNMPv2 or
SNMPv3
SNMPv1,
SNMPv2 or
SNMPv3
SNMPv1,
SNMPv2 or
SNMPv3
Must install the HP Service Pack for ProLiant and all
providers that ship with it.
See "Configuring ProLiant Linux Servers" on page 57.
Telnet or
SSH
ESX on ProLiant SNMPv1,
SNMPv2 or
SNMPv3
SNMPv1,
SNMPv2 or
SNMPv3
SNMPv1,
SNMPv2 or
SNMPv3
See "Configuring ProLiant VMware ESX Servers" on page
62.
SSH
ESXi on ProLiant WBEM WBEM WBEM WBEM See "Configuring ProLiant VMware ESXi Servers" on page
67.
Citrix Xen Server
on ProLiant
SNMPv1,
SNMPv2 or
SNMPv3
SNMPv1,
SNMPv2 or
SNMPv3
SNMPv1,
SNMPv2 or
SNMPv3
See "Configuring ProLiant Citrix Xen Servers" on page 70.
Telnet or
SSH
Hyper-V on
ProLiant
(See Note) Configuration collections are not supported.
Hyper-V is a role on a Windows server, so you should follow
the configuration instructions for a ProLiant Windows.
See "Configuring ProLiant Windows Servers" on page 45.
Table 1.1 Required Monitored Device Communication Protocols and Components for Insight RS Services, continued
HP Insight Remote Support 7.0.9:Monitored Devices Configuration Guide Page 24 of 267
Chapter 1: Understanding Monitored Devices Prerequisites