HP Insight Remote Support 7.0.9 Monitored Devices Configuration Guide

2. Select the TapeAssure tab and check that the monitored libraries appear in the TapeAssure
Overview window.
Important: TapeAssure can also monitor standalone tape drives (those not in a tape library) and
a host name appears instead of a library name; however, standalone drives cannot be
configured for Insight RS.
Configure SNMP on Your Tape Libraries
You must add the Hosting Device as a trap destination on your tape libraries for service events to reach
Insight RS.
Configure Enterprise Systems Library E-series and Enterprise
Modular Library
To allow Insight RS to register for your Enterprise Systems Library (ESL) E-series or Enterprise Modular
Library (EML) library health events using SNMP, Command View TL must be configured.
To configure SNMP in Command View TL, complete the following steps:
1. Log on to the Command View TL web interface for each ESL-E or EML.
2. Click the Configuration tab.
HP Insight Remote Support 7.0.9:Monitored Devices Configuration Guide Page 214 of 267
Chapter 28: Configuring StoreEver Tape Libraries