HP Insight Remote Support 7.0.9 Monitored Devices Configuration Guide

3. On the Configure tab, expand the Management Port list for the MSA 1510i.
4. Select the SNMP Service link from the list.
5. Modify any necessary configuration fields and make sure that the IP address of the Hosting Device is
listed as a Trap Address.
6. Click OK to commit your changes.
7. Exit the utility and discover your 1510i in the Insight RS Console.
Add Protocol Credentials and Start Discovery
To discover your monitored devices, complete the following steps:
HP Insight Remote Support 7.0.9:Monitored Devices Configuration Guide Page 195 of 267
Chapter 23: Configuring MSA15xx Modular Smart Arrays