HP Insight Remote Support 7.0.9 Monitored Devices Configuration Guide

Important: SNMP should be active by default, but if it for any reason it is not, Insight
Remote Support will not be supported. It is critical to verify SNMP is active.
4. From the menu select Configuration → Services → SNMP Notification.
5. On the Configure SNMP Notification page, modify the SNMP settings to include the Hosting
Device as an SNMP Trap Host and select your Notification Level from the drop-down list (the
Informational level is recommended).
HP Insight Remote Support 7.0.9:Monitored Devices Configuration Guide Page 185 of 267
Chapter 21: Configuring MSA23xx G2 Modular Smart Arrays