HP Insight Remote Support 7.0.9 Monitored Devices Configuration Guide

1. In a web browser, log on to the Insight RS Console.
2. In the main menu, select Discovery and click the Credentials tab.
3. From the Select and Configure Protocol drop-down list, select Event Log Monitoring Collector
(ELMC).
4. Click New. The New Credential dialog box appears.
Insight RS creates the protocol credential and it appears in the credentials table.
Discover the ABM
If you are managing the array from the P6000 Command View instance running on the Array Based
Management (ABM), then you need to discover the ABM.
To monitor an EVA/P6000, complete the following steps:
1. In the Named Credential drop-down list, select the Named Credential created earlier.
2. In the Insight RS Console, navigate to Discovery and discover the array.
3. After discovery completes successfully, browse to Devices in the main menu, and on the Device
Summary tab, click the array's Device Name to open the Device Details screen.
4. On the Device tab, expand the Warranty & Contract section and type the device's Support Type and
Support Identifier.
5. Click Save Changes to save the information.
6. Return to the Devices screen and verify that the Status of the device.
HP Insight Remote Support 7.0.9:Monitored Devices Configuration Guide Page 162 of 267
Chapter 18: Configuring P6000 and Enterprise Virtual Arrays