HP Insight Remote Support 7.0.9 Monitored Devices Configuration Guide

5. Select the Send authentication trap check box.
6. Click the Accept SNMP packets from any host option.
7. Click OK to save the settings.
Install and Configure SNMP
IBM Director Agent must be installed on the IBM server and the SNMP service must be configured. IBM
Director Agent includes an SNMP agent.
On a Windows 2008 and 2008 R2 server the solution was tested with IBM Systems Director Common
Agent version 6.1.1.
HP recommends installing the latest version of IBM Director Common Agent.
Installing IBM Director Agent
Download and install IBM Director Agent or IBM Systems Director Common Agent software for xSeries
at: http://www-03.ibm.com/systems/software/director/downloads/agents.html.
Note: If a service processor is installed on the monitored server, complete the following steps:
HP Insight Remote Support 7.0.9:Monitored Devices Configuration Guide Page 129 of 267
Chapter 15: Configuring IBM Servers